diff --git a/dadmote.yaml b/dadmote.yaml
index 5ca1005..b8b1eff 100644
--- a/dadmote.yaml
+++ b/dadmote.yaml
@@ -2,28 +2,6 @@
 substitutions:
   
 
-wifi:
-  ssid: ${wifi_ssid}
-  password: ${wifi_password}
-  power_save_mode: none
- 
-  ap:
-    ssid: "${device_name}"
-    password: ${wifi_password}
-
-
-esphome:
-  name: ${device_name}
-  friendly_name: ${my_friendly_name}
-  #min_version: 2022.10.2
-
-
-esp32:
-  board: esp32dev
-  framework:
-     type: arduino
-
-captive_portal:
 
 web_server:
   port: 80
@@ -31,837 +9,8 @@ web_server:
     username: admin
     password: ${wifi_password}
 
-##### OTA PASSWORD #####
-ota:
-  password: ${wifi_password}
-  ##### advanced config - change to use ota_password #####
-  # password: ${ota_password}
-  safe_mode: true
-  reboot_timeout: 3min
-  num_attempts: 3
-
-##### LOGGER #####
-logger:
-  baud_rate: 0
-  # level: WARN
-
-
-i2c:
-  sda: 19
-  scl: 22
-
-spi:
-  clk_pin: GPIO18
-  mosi_pin: GPIO19
-  
-display:
-  - platform: st7789v
-    cs_pin: GPIO5
-    dc_pin: GPIO9
-    reset_pin: GPIO1
-    model: Custom
-    height: 320
-    width: 240
-    offset_height: 0
-    offset_width: 0
-    lambda: |-
-      it.print(0, 0, id(font), "Hello World!");
 
 font:
   - file: "gfonts://Roboto"
     id: font
     size: 20
-
-##### START - BUTTON CONFIGURATION #####
-button:
-  ###### REBOOT BUTTON #####
-  - name: ${device_name} Restart
-    platform: restart
-    id: restart_nspanel
-
-  ##### UPDATE TFT DISPLAY #####
-  - name: ${device_name} Update TFT display
-    platform: template
-    icon: mdi:file-sync
-    id: tft_update
-    entity_category: config
-    on_press:
-      - binary_sensor.template.publish:
-          id: nextion_init
-          state: false
-      - delay: 16ms
-      - lambda: id(disp1).upload_tft();
-
-
-##### START - API CONFIGURATION #####
-api:
-  ##### advanced config - activate to use api_password #####
-  # password: ${api_password}
-  services:
-
-    ##### SERVICE TO UPDATE THE HMI FILE ##############
-    - service: upload_tft
-      then:
-        - binary_sensor.template.publish:
-            id: nextion_init
-            state: false
-        - lambda: 'id(disp1)->upload_tft();'
-
-    ##### SERVICE TO UPDATE THE TFT FILE from URL #####
-    - service: upload_tft_url
-      variables:
-        url: string
-      then:
-        - binary_sensor.template.publish:
-            id: nextion_init
-            state: false
-        - lambda: 'id(disp1)->set_tft_url(url.c_str());'
-        - lambda: 'id(disp1)->upload_tft();'
-
-
-    ##### Service to send a command "hide componente" directly to the display #####
-    - service: send_command_hide ### unused ###
-      variables:
-        component: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: 'id(disp1).hide_component(component.c_str());'
-
-    ##### Service to send a command "show componente" directly to the display #####
-    - service: send_command_show ### unused ###
-      variables:
-        component: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: 'id(disp1).show_component(component.c_str());'
-
-    ##### Service to send a command "show ALL componente" directly to the display #####
-    - service: send_command_show_all ### unused ###
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: 'id(disp1).show_component("255");'
-
-    ##### Service to send a command "font color" directly to the display #####
-    - service: send_command_font_color
-      variables:
-        component: string
-        message: int
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_font_color(component.c_str(), message);'
-
-    ##### Service to send a command "background color" directly to the display #####
-    - service: send_command_background_color
-      variables:
-        component: string
-        message: int
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_background_color(component.c_str(), message);'
-
-    ##### Service to show a notification-message on the screen #####
-    - service: notification_show
-      variables:
-        label: string
-        text: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            id(disp1).send_command_printf("page notification");
-            id(disp1).set_component_text_printf("notification.notifi_label", "%s", label.c_str());
-            id(disp1).set_component_text_printf("notification.notifi_text01", "%s", text.c_str());
-            id(notification_label).publish_state(label.c_str());
-            id(notification_text).publish_state(text.c_str());
-        - switch.turn_on: notification_unread
-        - if:
-            condition:
-              switch.is_on: notification_sound
-            then:
-              - rtttl.play: "two short:d=4,o=5,b=100:16e6,16e6"
-
-    ##### Service to clear the notification #####
-    - service: notification_clear
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            id(notification_label).publish_state("");
-            id(notification_text).publish_state("");
-        - switch.turn_off: notification_unread
-
-    ##### Service to set entity-information for settings-page(s)
-    - service: set_settings_entity
-      variables:
-        entity: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            id(settings_entity).publish_state(entity.c_str());
-
-    ##### Service to play a rtttl tones #####
-    # Example tones : https://codebender.cc/sketch:109888#RTTTL%20Songs.ino
-    - service: play_rtttl
-      variables:
-        song_str: string
-      then:
-        - rtttl.play:
-            rtttl: !lambda 'return song_str;'
-
-    # Service to show a QR code on the display (ex. for WiFi password)
-    - service: qr_code
-      variables:
-        qrdata: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            id(disp1).send_command_printf("page qrcode");
-            id(disp1).set_component_text_printf("qrcode.qrcode_value", "%s", qrdata.c_str());
-
-    #### Service to set climate state ####
-    - service: set_climate
-      variables:
-        current_temp: float
-        target_temp: float
-        temp_step: int
-        total_steps: int
-        slider_val: int
-        temp_offset: int
-        climate_icon: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            if (target_temp > -999)
-              {
-                id(disp1).set_component_value("climateslider", slider_val);
-                id(disp1).set_component_text_printf("target_temp", "%.1f°", target_temp);
-                id(disp1).set_component_text_printf("target_icon", "%s", climate_icon.c_str());
-                id(disp1).show_component("target_icon");
-                id(disp1).show_component("target_temp");
-                id(disp1).show_component("climateslider");
-                id(disp1).show_component("decrease_temp");
-                id(disp1).show_component("increase_temp");
-              }
-              else
-              {
-                id(disp1).hide_component("target_icon");
-                id(disp1).hide_component("target_temp");
-                id(disp1).hide_component("climateslider");
-                id(disp1).hide_component("decrease_temp");
-                id(disp1).hide_component("increase_temp");
-              }
-        - lambda: |-
-            id(disp1).send_command_printf("climateslider.maxval=%i", total_steps);
-            id(disp1).set_component_value("temp_offset", temp_offset);
-            id(disp1).set_component_value("temp_step", temp_step);
-            id(disp1).set_component_text_printf("current_temp", "%.1f°", current_temp);
-            id(disp1).show_component("current_temp");
-            id(disp1).show_component("current_icon");
-
-  #### Service to set the buttons ####
-    - service: set_button
-      variables:
-        btn_id: string
-        btn_pic: int
-        btn_bg: int
-        btn_icon_font: int
-        btn_txt_font: int
-        btn_bri_font: int
-        btn_icon: string
-        btn_label: string
-        btn_bri_txt: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            // ESP_LOGD("nextion", "set button %s", btn_id.c_str());
-            std::string btnicon = btn_id.c_str() + std::string("icon");
-            std::string btntext = btn_id.c_str() + std::string("text");
-            std::string btnbri = btn_id.c_str() + std::string("bri");
-            id(disp1).send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
-            id(disp1).set_component_background_color(btnicon.c_str(), btn_bg);
-            id(disp1).set_component_background_color(btntext.c_str(), btn_bg);
-            id(disp1).set_component_background_color(btnbri.c_str(), btn_bg);
-            id(disp1).set_component_font_color(btnicon.c_str(), btn_icon_font);
-            id(disp1).set_component_font_color(btntext.c_str(), btn_txt_font);
-            id(disp1).set_component_font_color(btnbri.c_str(), btn_bri_font);
-            id(disp1).set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
-            id(disp1).set_component_text_printf(btntext.c_str(), "%s", btn_label.c_str());
-            // id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
-            if (strcmp(btn_bri_txt.c_str(), "0") != 0) {
-              id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
-            } else {
-              id(disp1).set_component_text_printf(btnbri.c_str(), " ");
-            }
-
-    ##### SERVICE TO WAKE UP THE DISPLAY #####
-    - service: wake_up_display
-      variables:
-        option: string
-      then:
-        - lambda: |-
-            DynamicJsonDocument doc(1024);
-            deserializeJson(doc, id(disp1_nspanel_event).state);
-            std::string page = doc["page"];
-            if (page == "screensaver") {
-              id(disp1).send_command_printf("page home");
-            } else {
-              if (page == "home"){
-                id(disp1).send_command_printf("dim=brightness.val");
-              }
-            }
-        - if:
-            condition:
-              - lambda: 'return option == "keep_wake";'
-            then:
-              - lambda: id(disp1).send_command_printf("home.dimtimer.en=1");
-              - lambda: id(disp1).send_command_printf("home.sleeptimer.en=1");
-        - if:
-            condition:
-              - lambda: 'return option == "keep_page";'
-            then:
-              - lambda: id(disp1).send_command_printf("home.dimtimer.en=1");
-              - lambda: id(disp1).send_command_printf("home.sleeptimer.en=1");
-              - lambda: |-
-                  id(page_timer)->execute(int(id(page_timeout).state));
-
-    #### Service to set the entities ####
-    - service: set_entity
-      variables:
-        ent_id: string
-        ent_icon: string
-        ent_label: string
-        ent_value: string
-        ent_value_xcen: string
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - lambda: |-
-            // ESP_LOGD("nextion", "set entity %s", ent_id.c_str());
-            std::string enticon = ent_id.c_str() + std::string("_pic");
-            std::string entlabel = ent_id.c_str() + std::string("_label");
-            std::string entxcen = ent_id.c_str() + std::string(".xcen=") + ent_value_xcen.c_str();
-            id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
-            if (strcmp(ent_icon.c_str(), "0") != 0) {
-              id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
-            }
-            id(disp1).set_component_text_printf(entlabel.c_str(), "%s", ent_label.c_str());
-            id(disp1).set_component_text_printf(ent_id.c_str(), "%s", ent_value.c_str());
-            if (strcmp(ent_value_xcen.c_str(), "0") != 0) {
-              id(disp1).send_command_printf("%s", entxcen.c_str());
-            }
-
-##### START - GLOBALS CONFIGURATION #####
-globals:
-
-  ##### Save Display Brightness for NSPanel reboot #####
-  - id: display_brightness_global
-    type: int
-    restore_value: true
-    initial_value: '100'
-
-  ##### Save Display DIM Brightness for NSPanel reboot
-  - id: display_dim_brightness_global
-    type: int
-    restore_value: true
-    initial_value: '10'
-
-  ##### Temperature Correction #####
-  - id: temperature_correction_global
-    type: float
-    restore_value: true
-    initial_value: '0.0'
-
-##### START - BINARY SENSOR CONFIGURATION #####
-binary_sensor:
-
-  ###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
-  - name: ${device_name} Left Button
-    platform: gpio
-    id: left_button
-    pin:
-      number: 14
-      inverted: true
-    on_click:
-      then:
-        - if:
-            condition:
-              and:
-                - switch.is_on: relay1_fallback
-                - not:
-                    api.connected:
-            then:
-              - switch.toggle: relay_1
-              - if:
-                  condition:
-                    switch.is_on: relay_1
-                  then:
-                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=78");
-                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000E3A5");
-                  else:
-                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=77");
-                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000FFFF");
-
-  ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
-  - name: ${device_name} Right Button
-    platform: gpio
-    id: right_button
-    pin:
-      number: 27
-      inverted: true
-    on_click:
-      then:
-        - if:
-            condition:
-              and:
-                - switch.is_on: relay2_fallback
-                - not:
-                    api.connected:
-            then:
-              - switch.toggle: relay_2
-              - if:
-                  condition:
-                    switch.is_on: relay_2
-                  then:
-                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=78");
-                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000E3A8");
-                  else:
-                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=77");
-                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000FFFF");
-
-  ##### JUMP PAGE TO SETTING PAGE #####
-  - name: $device_name setting page
-    platform: nextion
-    page_id: 0
-    component_id: 52
-    internal: true
-    on_multi_click:
-      - timing:
-          - ON for at least 1s #LONG Press
-        then:
-          - lambda: 'id(disp1).send_command_printf("page settings");'
-
-  ##### Restart NSPanel Button - Setting Page #####
-  - name: ${device_name} Restart
-    platform: nextion
-    page_id: 7
-    component_id: 13
-    internal: true
-    on_click:
-      - button.press: restart_nspanel
-
-  ##### Restart NSPanel Button - Boot Page #####
-  - name: ${device_name} Restart
-    platform: nextion
-    page_id: 8
-    component_id: 4
-    internal: true
-    on_click:
-      - button.press: restart_nspanel
-
-  ##### Sleep mode NSPanel Button #####
-  - name: ${device_name} Sleep mode
-    platform: nextion
-    page_id: 7
-    component_id: 14
-    internal: true
-    on_click:
-      - logger.log: "Sleep mode - Nextion toggle"
-      - switch.toggle: sleep_mode
-
-  ##### global variable to keep track on whether the Nextion display is ready or not.
-  ## Delays initial info from HA to the display #####
-  - name: ${device_name} Nextion display
-    id: nextion_init
-    platform: template
-    device_class: connectivity
-    publish_initial_state: true
-    entity_category: diagnostic
-    icon: mdi:tablet-dashboard
-
-  ##### API connection status
-  - platform: status
-    name: ${device_name} Status
-
-##### START - SENSOR CONFIGURATION #####
-sensor:
-
-  ##### Uptime #####
-  - name: ${device_name} uptime
-    platform: uptime
-    disabled_by_default: true
-
-  ##### WIFI Signal stregth
-  - name: ${device_name} RSSI
-    platform: wifi_signal
-    update_interval: 60s
-    on_value:
-      - if:
-          condition:
-            wifi.connected:
-          then:
-            - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000E5A8");
-          else:
-            - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000FFFF");
-
-  ##### INTERNAL TEMPERATURE SENSOR, ADC VALUE #####
-  - id: ntc_source
-    platform: adc
-    pin: 38
-    update_interval: 60s
-    attenuation: 11db
-
-  ##### INTERNAL TEMPERATURE SENSOR, adc reading converted to resistance (calculation)#####
-  - id: resistance_sensor
-    platform: resistance
-    sensor: ntc_source
-    configuration: DOWNSTREAM
-    resistor: 11.2kOhm
-
-  ##### INTERNAL TEMPERATURE SENSOR, resistance to temperature (calculation) #####
-  - name: ${device_name} Temperature
-    platform: ntc
-    id: temp_nspanel
-    sensor: resistance_sensor
-    calibration:
-      b_constant: 3950
-      reference_temperature: 25°C
-      reference_resistance: 10kOhm
-    filters:
-      - lambda: return x + id(temperature_correction_global);
-    #on_value:
-    #  then:
-    #    - wait_until:
-    #        binary_sensor.is_on: nextion_init
-    #     - lambda: id(disp1).set_component_text_printf("home.current_temp", "%.1f°", id(temp_nspanel).state); # onboard temp (thermostat temp) to home page.
-    #     - lambda: id(disp1).set_component_text_printf("climate.current_temp", "%.1f", id(temp_nspanel).state);
-
-  ###### Display Brightness GET VALUE FROM NSPanel SLIDER #####
-  - name: ${device_name} brightness Slider
-    platform: nextion
-    id: brightslider
-    variable_name: brightslider
-    internal: true
-    on_value:
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - number.set:
-            id: display_brightness
-            value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val
-        - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-
-  ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
-  - name: ${device_name} dim brightness slider
-    platform: nextion
-    id: dimslider
-    variable_name: dimslider
-    internal: true
-    on_value:
-      then:
-        - wait_until:
-            binary_sensor.is_on: nextion_init
-        - number.set:
-            id: display_dim_brightness
-            value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val
-        - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-
-##### START - TEXT SENSOR CONFIGURATION #####
-text_sensor:
-
-  ##### ESPhome version used to compile the app #####
-  - platform: version
-    name: ${device_name} ESPhome Version
-    disabled_by_default: true
-
-  - platform: wifi_info
-    ip_address:
-      name: ${device_name} IP
-      disabled_by_default: true
-      id: ip_address
-    ssid:
-      name: ${device_name} SSID
-      disabled_by_default: true
-    bssid:
-      name: ${device_name} BSSID
-      disabled_by_default: true
-
-  - name: ${device_name} Notification Label
-    platform: template
-    id: notification_label
-
-  - name: ${device_name} Notification Text
-    platform: template
-    id: notification_text
-
-  - name: ${device_name} Settings Entity
-    platform: template
-    id: settings_entity
-
-  ##### NSPanel event sensor, the main action sensor - push to HA #####
-  - name: ${device_name} NSPanel event
-    platform: nextion
-    nextion_id: disp1
-    id: disp1_nspanel_event
-    component_name: nspanelevent
-    internal: false
-    filters:
-      - lambda: |-
-          x = x.c_str();
-          x.shrink_to_fit();
-          return x;
-    on_value:
-      then:
-        - lambda: |-
-            id(page_timer)->execute(int(id(page_timeout).state));
-
-  ##### touchevent sensor, Reset the page timeout #####
-  - id: disp1_touchevent
-    platform: nextion
-    nextion_id: disp1
-    #name: ${device_name} touchevent
-    component_name: touchevent
-    internal: true
-    filters:
-      - lambda: |-
-          x = x.c_str();
-          x.shrink_to_fit();
-          return x;
-    on_value:
-      then:
-        - lambda: |-
-            id(page_timer)->execute(int(id(page_timeout).state));
-
-##### START - SWITCH CONFIGURATION #####
-switch:
-
-  ##### Notification unread #####
-  - name: ${device_name} Notification unread
-    platform: template
-    id: notification_unread
-    entity_category: config
-    restore_mode: RESTORE_DEFAULT_OFF
-    optimistic: true
-
-  ##### Notification sound #####
-  - name: ${device_name} Notification sound
-    platform: template
-    id: notification_sound
-    entity_category: config
-    optimistic: true
-    restore_mode: RESTORE_DEFAULT_OFF
-
-  ##### Confirmation Message #####
-  - name: ${device_name} Confirmation Message
-    platform: template
-    id: confirmation_message
-    entity_category: config
-    restore_mode: RESTORE_DEFAULT_OFF
-    optimistic: true
-
-  ##### PHYSICAL SWITCH 1 #####
-  - name: ${device_name} Relay 1
-    platform: gpio
-    id: relay_1
-    pin:
-      number: 22
-    restore_mode: RESTORE_DEFAULT_OFF
-
-  ##### PHYSICAL SWITCH 2 ######
-  - name: ${device_name} Relay 2
-    platform: gpio
-    id: relay_2
-    pin:
-      number: 19
-    restore_mode: RESTORE_DEFAULT_OFF
-
-  ##### DISPLAY ALWAYS ON #####
-  - name: ${device_name} Screen Power
-    platform: gpio
-    id: screen_power
-    entity_category: config
-    pin:
-      number: 4
-      inverted: true
-    restore_mode: ALWAYS_ON
-    internal: true
-
-  ##### Switch Display Sleep mode #####
-  - name: ${device_name} Sleep mode
-    platform: template
-    device_class: switch
-    id: sleep_mode
-    entity_category: config
-    restore_mode: RESTORE_DEFAULT_OFF
-    optimistic: false
-    turn_on_action: &sleep_mode-turn_on
-      - logger.log: "Sleep mode - Turn on"
-      - lambda: id(disp1).send_command_printf("home.sleepmodus.val=1");
-      - lambda: id(disp1).set_component_value("settings.bt1",1);
-      - switch.template.publish:
-          id: sleep_mode
-          state: ON
-    turn_off_action: &sleep_mode-turn_off
-      - logger.log: "Sleep mode - Turn off"
-      - lambda: id(disp1).send_command_printf("home.sleepmodus.val=0");
-      - lambda: id(disp1).set_component_value("settings.bt1",0);
-      - switch.template.publish:
-          id: sleep_mode
-          state: OFF
-
-  ##### Relay Local control Fallback #####
-  - name: ${device_name} Relay 1 Local Fallback
-    platform: template
-    id: relay1_fallback
-    entity_category: config
-    optimistic: true
-    restore_mode: RESTORE_DEFAULT_OFF
-
-  - name: ${device_name} Relay 2 Local Fallback
-    platform: template
-    id: relay2_fallback
-    entity_category: config
-    optimistic: true
-    restore_mode: RESTORE_DEFAULT_OFF
-
-##### START - NUMBER CONFIGURATION #####
-number:
-
-  ##### SCREEN BRIGHTNESS #####
-  - platform: template
-    name: ${device_name} Display Brightness
-    id: display_brightness
-    entity_category: config
-    unit_of_measurement: '%'
-    min_value: 1
-    max_value: 100
-    step: 1
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - lambda: 'id(disp1).set_backlight_brightness(x/100);'
-        - lambda: 'id(disp1).send_command_printf("home.brightness.val=%i", int(x));'
-        - globals.set:
-            id: display_brightness_global
-            value: !lambda 'return int(x);'
-
-  ##### SCREEN BRIGHTNESS DIMMED DOWN #####
-  - platform: template
-    name: ${device_name} Display Brightness Dimdown
-    id: display_dim_brightness
-    entity_category: config
-    unit_of_measurement: '%'
-    min_value: 1
-    max_value: 100
-    step: 1
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - lambda: 'id(disp1).send_command_printf("home.brightdd.val=%i", int(x));'
-        - globals.set:
-            id: display_dim_brightness_global
-            value: !lambda 'return int(x);'
-
-  ##### Temperature Correction #####
-  - platform: template
-    name: ${device_name} Temperature Correction
-    id: temperature_correction
-    entity_category: config
-    unit_of_measurement: '°C'
-    min_value: -10
-    max_value: 10
-    step: 0.5
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - globals.set:
-            id: temperature_correction_global
-            value: !lambda 'return x;'
-
-  ##### page-timeout #####
-  - platform: template
-    name: ${device_name} Page Timeout
-    id: page_timeout
-    entity_category: config
-    min_value: 0
-    max_value: 60
-    initial_value: 10
-    step: 1
-    restore_value: true
-    optimistic: true
-
-##### START - DISPLAY START CONFIGURATION #####
-display:
-  - id: disp1
-    platform: nextion
-    uart_id: tf_uart
-    tft_url: ${nextion_update_url}
-    on_setup:
-      then:
-        - logger.log: "Nextion start - Jump to page 8"
-        - lambda: id(disp1).send_command_printf("page 8");
-        - logger.log: "Nextion start - Publish ESPHome version"
-        - lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.4.1"); ### esphome-version ###
-        - logger.log: "Nextion start - Wait for Home Assistant API"
-        - wait_until:
-            api.connected
-        - logger.log: "Nextion start - Publish IP address"
-        - lambda: id(disp1).set_component_text_printf("boot.ip_addr", "%s", id(ip_address).state.c_str());
-        - delay: 1s
-        - logger.log: "Nextion start - Set display brigntess"
-        - number.set:
-            id: display_brightness
-            value: !lambda 'return id(display_brightness_global);'
-        - logger.log: "Nextion start - Set display dim brightness"
-        - number.set:
-            id: display_dim_brightness
-            value: !lambda 'return id(display_dim_brightness_global);'
-        - logger.log: "Nextion start - Update settings page"
-        - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-        - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-        - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-        - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-        - if:
-            condition:
-              switch.is_off: sleep_mode
-            then: *sleep_mode-turn_off
-            else: *sleep_mode-turn_on
-        - delay: 1s
-        - logger.log: "Nextion start - Inform Home Assistant display is ready"
-        - binary_sensor.template.publish:
-            id: nextion_init
-            state: true
-        - logger.log: "Nextion start - Done!"
-
-### Script for page_timer
-script:
-  - id: page_timer
-    mode: restart
-    parameters:
-      delay: int
-    then:
-      - lambda: ESP_LOGD("nspanel", "start page-timer delay %i", int(id(page_timeout).state));
-      - delay: !lambda return delay *1000;
-      - lambda: |-
-          DynamicJsonDocument doc(1024);
-          deserializeJson(doc, id(disp1_nspanel_event).state);
-          std::string page = doc["page"];
-          if (page == "home" or page == "screensaver" or page == "boot" or int(id(page_timeout).state) == 0) {
-            ESP_LOGD("nspanel", "no page-jump");
-          } else {
-            ESP_LOGD("nspanel", "timer->home");
-            id(disp1).send_command_printf("page 0");`
-          }
\ No newline at end of file