MoserHome_pub/remote_esphome
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update dadmote.yaml

Browse Source
This commit is contained in:
moserja
2024-01-16 20:37:23 +00:00
parent fd2835388b
commit 61d00b2e0e
1 changed files with 0 additions and 851 deletions
Download Patch File Download Diff File Expand all files Collapse all files

851
dadmote.yaml
View File

@@ -2,28 +2,6 @@
substitutions:
wifi:
ssid: ${wifi_ssid}
password: ${wifi_password}
power_save_mode: none
ap:
ssid: "${device_name}"
password: ${wifi_password}
esphome:
name: ${device_name}
friendly_name: ${my_friendly_name}
#min_version: 2022.10.2
esp32:
board: esp32dev
framework:
type: arduino
captive_portal:
web_server:
port: 80
@@ -31,837 +9,8 @@ web_server:
username: admin
password: ${wifi_password}
##### OTA PASSWORD #####
ota:
password: ${wifi_password}
##### advanced config - change to use ota_password #####
# password: ${ota_password}
safe_mode: true
reboot_timeout: 3min
num_attempts: 3
##### LOGGER #####
logger:
baud_rate: 0
# level: WARN
i2c:
sda: 19
scl: 22
spi:
clk_pin: GPIO18
mosi_pin: GPIO19
display:
- platform: st7789v
cs_pin: GPIO5
dc_pin: GPIO9
reset_pin: GPIO1
model: Custom
height: 320
width: 240
offset_height: 0
offset_width: 0
lambda: |-
it.print(0, 0, id(font), "Hello World!");
font:
- file: "gfonts://Roboto"
id: font
size: 20
##### START - BUTTON CONFIGURATION #####
button:
###### REBOOT BUTTON #####
- name: ${device_name} Restart
platform: restart
id: restart_nspanel
##### UPDATE TFT DISPLAY #####
- name: ${device_name} Update TFT display
platform: template
icon: mdi:file-sync
id: tft_update
entity_category: config
on_press:
- binary_sensor.template.publish:
id: nextion_init
state: false
- delay: 16ms
- lambda: id(disp1).upload_tft();
##### START - API CONFIGURATION #####
api:
##### advanced config - activate to use api_password #####
# password: ${api_password}
services:
##### SERVICE TO UPDATE THE HMI FILE ##############
- service: upload_tft
then:
- binary_sensor.template.publish:
id: nextion_init
state: false
- lambda: 'id(disp1)->upload_tft();'
##### SERVICE TO UPDATE THE TFT FILE from URL #####
- service: upload_tft_url
variables:
url: string
then:
- binary_sensor.template.publish:
id: nextion_init
state: false
- lambda: 'id(disp1)->set_tft_url(url.c_str());'
- lambda: 'id(disp1)->upload_tft();'
##### Service to send a command "hide componente" directly to the display #####
- service: send_command_hide ### unused ###
variables:
component: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: 'id(disp1).hide_component(component.c_str());'
##### Service to send a command "show componente" directly to the display #####
- service: send_command_show ### unused ###
variables:
component: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: 'id(disp1).show_component(component.c_str());'
##### Service to send a command "show ALL componente" directly to the display #####
- service: send_command_show_all ### unused ###
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: 'id(disp1).show_component("255");'
##### Service to send a command "font color" directly to the display #####
- service: send_command_font_color
variables:
component: string
message: int
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: 'id(disp1).set_component_font_color(component.c_str(), message);'
##### Service to send a command "background color" directly to the display #####
- service: send_command_background_color
variables:
component: string
message: int
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: 'id(disp1).set_component_background_color(component.c_str(), message);'
##### Service to show a notification-message on the screen #####
- service: notification_show
variables:
label: string
text: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
id(disp1).send_command_printf("page notification");
id(disp1).set_component_text_printf("notification.notifi_label", "%s", label.c_str());
id(disp1).set_component_text_printf("notification.notifi_text01", "%s", text.c_str());
id(notification_label).publish_state(label.c_str());
id(notification_text).publish_state(text.c_str());
- switch.turn_on: notification_unread
- if:
condition:
switch.is_on: notification_sound
then:
- rtttl.play: "two short:d=4,o=5,b=100:16e6,16e6"
##### Service to clear the notification #####
- service: notification_clear
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
id(notification_label).publish_state("");
id(notification_text).publish_state("");
- switch.turn_off: notification_unread
##### Service to set entity-information for settings-page(s)
- service: set_settings_entity
variables:
entity: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
id(settings_entity).publish_state(entity.c_str());
##### Service to play a rtttl tones #####
# Example tones : https://codebender.cc/sketch:109888#RTTTL%20Songs.ino
- service: play_rtttl
variables:
song_str: string
then:
- rtttl.play:
rtttl: !lambda 'return song_str;'
# Service to show a QR code on the display (ex. for WiFi password)
- service: qr_code
variables:
qrdata: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
id(disp1).send_command_printf("page qrcode");
id(disp1).set_component_text_printf("qrcode.qrcode_value", "%s", qrdata.c_str());
#### Service to set climate state ####
- service: set_climate
variables:
current_temp: float
target_temp: float
temp_step: int
total_steps: int
slider_val: int
temp_offset: int
climate_icon: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
if (target_temp > -999)
{
id(disp1).set_component_value("climateslider", slider_val);
id(disp1).set_component_text_printf("target_temp", "%.1f°", target_temp);
id(disp1).set_component_text_printf("target_icon", "%s", climate_icon.c_str());
id(disp1).show_component("target_icon");
id(disp1).show_component("target_temp");
id(disp1).show_component("climateslider");
id(disp1).show_component("decrease_temp");
id(disp1).show_component("increase_temp");
}
else
{
id(disp1).hide_component("target_icon");
id(disp1).hide_component("target_temp");
id(disp1).hide_component("climateslider");
id(disp1).hide_component("decrease_temp");
id(disp1).hide_component("increase_temp");
}
- lambda: |-
id(disp1).send_command_printf("climateslider.maxval=%i", total_steps);
id(disp1).set_component_value("temp_offset", temp_offset);
id(disp1).set_component_value("temp_step", temp_step);
id(disp1).set_component_text_printf("current_temp", "%.1f°", current_temp);
id(disp1).show_component("current_temp");
id(disp1).show_component("current_icon");
#### Service to set the buttons ####
- service: set_button
variables:
btn_id: string
btn_pic: int
btn_bg: int
btn_icon_font: int
btn_txt_font: int
btn_bri_font: int
btn_icon: string
btn_label: string
btn_bri_txt: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
// ESP_LOGD("nextion", "set button %s", btn_id.c_str());
std::string btnicon = btn_id.c_str() + std::string("icon");
std::string btntext = btn_id.c_str() + std::string("text");
std::string btnbri = btn_id.c_str() + std::string("bri");
id(disp1).send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
id(disp1).set_component_background_color(btnicon.c_str(), btn_bg);
id(disp1).set_component_background_color(btntext.c_str(), btn_bg);
id(disp1).set_component_background_color(btnbri.c_str(), btn_bg);
id(disp1).set_component_font_color(btnicon.c_str(), btn_icon_font);
id(disp1).set_component_font_color(btntext.c_str(), btn_txt_font);
id(disp1).set_component_font_color(btnbri.c_str(), btn_bri_font);
id(disp1).set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
id(disp1).set_component_text_printf(btntext.c_str(), "%s", btn_label.c_str());
// id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
if (strcmp(btn_bri_txt.c_str(), "0") != 0) {
id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
} else {
id(disp1).set_component_text_printf(btnbri.c_str(), " ");
}
##### SERVICE TO WAKE UP THE DISPLAY #####
- service: wake_up_display
variables:
option: string
then:
- lambda: |-
DynamicJsonDocument doc(1024);
deserializeJson(doc, id(disp1_nspanel_event).state);
std::string page = doc["page"];
if (page == "screensaver") {
id(disp1).send_command_printf("page home");
} else {
if (page == "home"){
id(disp1).send_command_printf("dim=brightness.val");
}
}
- if:
condition:
- lambda: 'return option == "keep_wake";'
then:
- lambda: id(disp1).send_command_printf("home.dimtimer.en=1");
- lambda: id(disp1).send_command_printf("home.sleeptimer.en=1");
- if:
condition:
- lambda: 'return option == "keep_page";'
then:
- lambda: id(disp1).send_command_printf("home.dimtimer.en=1");
- lambda: id(disp1).send_command_printf("home.sleeptimer.en=1");
- lambda: |-
id(page_timer)->execute(int(id(page_timeout).state));
#### Service to set the entities ####
- service: set_entity
variables:
ent_id: string
ent_icon: string
ent_label: string
ent_value: string
ent_value_xcen: string
then:
- wait_until:
binary_sensor.is_on: nextion_init
- lambda: |-
// ESP_LOGD("nextion", "set entity %s", ent_id.c_str());
std::string enticon = ent_id.c_str() + std::string("_pic");
std::string entlabel = ent_id.c_str() + std::string("_label");
std::string entxcen = ent_id.c_str() + std::string(".xcen=") + ent_value_xcen.c_str();
id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
if (strcmp(ent_icon.c_str(), "0") != 0) {
id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
}
id(disp1).set_component_text_printf(entlabel.c_str(), "%s", ent_label.c_str());
id(disp1).set_component_text_printf(ent_id.c_str(), "%s", ent_value.c_str());
if (strcmp(ent_value_xcen.c_str(), "0") != 0) {
id(disp1).send_command_printf("%s", entxcen.c_str());
}
##### START - GLOBALS CONFIGURATION #####
globals:
##### Save Display Brightness for NSPanel reboot #####
- id: display_brightness_global
type: int
restore_value: true
initial_value: '100'
##### Save Display DIM Brightness for NSPanel reboot
- id: display_dim_brightness_global
type: int
restore_value: true
initial_value: '10'
##### Temperature Correction #####
- id: temperature_correction_global
type: float
restore_value: true
initial_value: '0.0'
##### START - BINARY SENSOR CONFIGURATION #####
binary_sensor:
###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
- name: ${device_name} Left Button
platform: gpio
id: left_button
pin:
number: 14
inverted: true
on_click:
then:
- if:
condition:
and:
- switch.is_on: relay1_fallback
- not:
api.connected:
then:
- switch.toggle: relay_1
- if:
condition:
switch.is_on: relay_1
then:
- lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=78");
- lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000E3A5");
else:
- lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=77");
- lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000FFFF");
##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
- name: ${device_name} Right Button
platform: gpio
id: right_button
pin:
number: 27
inverted: true
on_click:
then:
- if:
condition:
and:
- switch.is_on: relay2_fallback
- not:
api.connected:
then:
- switch.toggle: relay_2
- if:
condition:
switch.is_on: relay_2
then:
- lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=78");
- lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000E3A8");
else:
- lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=77");
- lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000FFFF");
##### JUMP PAGE TO SETTING PAGE #####
- name: $device_name setting page
platform: nextion
page_id: 0
component_id: 52
internal: true
on_multi_click:
- timing:
- ON for at least 1s #LONG Press
then:
- lambda: 'id(disp1).send_command_printf("page settings");'
##### Restart NSPanel Button - Setting Page #####
- name: ${device_name} Restart
platform: nextion
page_id: 7
component_id: 13
internal: true
on_click:
- button.press: restart_nspanel
##### Restart NSPanel Button - Boot Page #####
- name: ${device_name} Restart
platform: nextion
page_id: 8
component_id: 4
internal: true
on_click:
- button.press: restart_nspanel
##### Sleep mode NSPanel Button #####
- name: ${device_name} Sleep mode
platform: nextion
page_id: 7
component_id: 14
internal: true
on_click:
- logger.log: "Sleep mode - Nextion toggle"
- switch.toggle: sleep_mode
##### global variable to keep track on whether the Nextion display is ready or not.
## Delays initial info from HA to the display #####
- name: ${device_name} Nextion display
id: nextion_init
platform: template
device_class: connectivity
publish_initial_state: true
entity_category: diagnostic
icon: mdi:tablet-dashboard
##### API connection status
- platform: status
name: ${device_name} Status
##### START - SENSOR CONFIGURATION #####
sensor:
##### Uptime #####
- name: ${device_name} uptime
platform: uptime
disabled_by_default: true
##### WIFI Signal stregth
- name: ${device_name} RSSI
platform: wifi_signal
update_interval: 60s
on_value:
- if:
condition:
wifi.connected:
then:
- lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000E5A8");
else:
- lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000FFFF");
##### INTERNAL TEMPERATURE SENSOR, ADC VALUE #####
- id: ntc_source
platform: adc
pin: 38
update_interval: 60s
attenuation: 11db
##### INTERNAL TEMPERATURE SENSOR, adc reading converted to resistance (calculation)#####
- id: resistance_sensor
platform: resistance
sensor: ntc_source
configuration: DOWNSTREAM
resistor: 11.2kOhm
##### INTERNAL TEMPERATURE SENSOR, resistance to temperature (calculation) #####
- name: ${device_name} Temperature
platform: ntc
id: temp_nspanel
sensor: resistance_sensor
calibration:
b_constant: 3950
reference_temperature: 25°C
reference_resistance: 10kOhm
filters:
- lambda: return x + id(temperature_correction_global);
#on_value:
# then:
# - wait_until:
# binary_sensor.is_on: nextion_init
# - lambda: id(disp1).set_component_text_printf("home.current_temp", "%.1f°", id(temp_nspanel).state); # onboard temp (thermostat temp) to home page.
# - lambda: id(disp1).set_component_text_printf("climate.current_temp", "%.1f", id(temp_nspanel).state);
###### Display Brightness GET VALUE FROM NSPanel SLIDER #####
- name: ${device_name} brightness Slider
platform: nextion
id: brightslider
variable_name: brightslider
internal: true
on_value:
then:
- wait_until:
binary_sensor.is_on: nextion_init
- number.set:
id: display_brightness
value: !lambda 'return int(x);'
# send text field percentage of current_lightslider_val
- lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
- name: ${device_name} dim brightness slider
platform: nextion
id: dimslider
variable_name: dimslider
internal: true
on_value:
then:
- wait_until:
binary_sensor.is_on: nextion_init
- number.set:
id: display_dim_brightness
value: !lambda 'return int(x);'
# send text field percentage of current_lightslider_val
- lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
##### START - TEXT SENSOR CONFIGURATION #####
text_sensor:
##### ESPhome version used to compile the app #####
- platform: version
name: ${device_name} ESPhome Version
disabled_by_default: true
- platform: wifi_info
ip_address:
name: ${device_name} IP
disabled_by_default: true
id: ip_address
ssid:
name: ${device_name} SSID
disabled_by_default: true
bssid:
name: ${device_name} BSSID
disabled_by_default: true
- name: ${device_name} Notification Label
platform: template
id: notification_label
- name: ${device_name} Notification Text
platform: template
id: notification_text
- name: ${device_name} Settings Entity
platform: template
id: settings_entity
##### NSPanel event sensor, the main action sensor - push to HA #####
- name: ${device_name} NSPanel event
platform: nextion
nextion_id: disp1
id: disp1_nspanel_event
component_name: nspanelevent
internal: false
filters:
- lambda: |-
x = x.c_str();
x.shrink_to_fit();
return x;
on_value:
then:
- lambda: |-
id(page_timer)->execute(int(id(page_timeout).state));
##### touchevent sensor, Reset the page timeout #####
- id: disp1_touchevent
platform: nextion
nextion_id: disp1
#name: ${device_name} touchevent
component_name: touchevent
internal: true
filters:
- lambda: |-
x = x.c_str();
x.shrink_to_fit();
return x;
on_value:
then:
- lambda: |-
id(page_timer)->execute(int(id(page_timeout).state));
##### START - SWITCH CONFIGURATION #####
switch:
##### Notification unread #####
- name: ${device_name} Notification unread
platform: template
id: notification_unread
entity_category: config
restore_mode: RESTORE_DEFAULT_OFF
optimistic: true
##### Notification sound #####
- name: ${device_name} Notification sound
platform: template
id: notification_sound
entity_category: config
optimistic: true
restore_mode: RESTORE_DEFAULT_OFF
##### Confirmation Message #####
- name: ${device_name} Confirmation Message
platform: template
id: confirmation_message
entity_category: config
restore_mode: RESTORE_DEFAULT_OFF
optimistic: true
##### PHYSICAL SWITCH 1 #####
- name: ${device_name} Relay 1
platform: gpio
id: relay_1
pin:
number: 22
restore_mode: RESTORE_DEFAULT_OFF
##### PHYSICAL SWITCH 2 ######
- name: ${device_name} Relay 2
platform: gpio
id: relay_2
pin:
number: 19
restore_mode: RESTORE_DEFAULT_OFF
##### DISPLAY ALWAYS ON #####
- name: ${device_name} Screen Power
platform: gpio
id: screen_power
entity_category: config
pin:
number: 4
inverted: true
restore_mode: ALWAYS_ON
internal: true
##### Switch Display Sleep mode #####
- name: ${device_name} Sleep mode
platform: template
device_class: switch
id: sleep_mode
entity_category: config
restore_mode: RESTORE_DEFAULT_OFF
optimistic: false
turn_on_action: &sleep_mode-turn_on
- logger.log: "Sleep mode - Turn on"
- lambda: id(disp1).send_command_printf("home.sleepmodus.val=1");
- lambda: id(disp1).set_component_value("settings.bt1",1);
- switch.template.publish:
id: sleep_mode
state: ON
turn_off_action: &sleep_mode-turn_off
- logger.log: "Sleep mode - Turn off"
- lambda: id(disp1).send_command_printf("home.sleepmodus.val=0");
- lambda: id(disp1).set_component_value("settings.bt1",0);
- switch.template.publish:
id: sleep_mode
state: OFF
##### Relay Local control Fallback #####
- name: ${device_name} Relay 1 Local Fallback
platform: template
id: relay1_fallback
entity_category: config
optimistic: true
restore_mode: RESTORE_DEFAULT_OFF
- name: ${device_name} Relay 2 Local Fallback
platform: template
id: relay2_fallback
entity_category: config
optimistic: true
restore_mode: RESTORE_DEFAULT_OFF
##### START - NUMBER CONFIGURATION #####
number:
##### SCREEN BRIGHTNESS #####
- platform: template
name: ${device_name} Display Brightness
id: display_brightness
entity_category: config
unit_of_measurement: '%'
min_value: 1
max_value: 100
step: 1
restore_value: true
optimistic: true
set_action:
then:
- lambda: 'id(disp1).set_backlight_brightness(x/100);'
- lambda: 'id(disp1).send_command_printf("home.brightness.val=%i", int(x));'
- globals.set:
id: display_brightness_global
value: !lambda 'return int(x);'
##### SCREEN BRIGHTNESS DIMMED DOWN #####
- platform: template
name: ${device_name} Display Brightness Dimdown
id: display_dim_brightness
entity_category: config
unit_of_measurement: '%'
min_value: 1
max_value: 100
step: 1
restore_value: true
optimistic: true
set_action:
then:
- lambda: 'id(disp1).send_command_printf("home.brightdd.val=%i", int(x));'
- globals.set:
id: display_dim_brightness_global
value: !lambda 'return int(x);'
##### Temperature Correction #####
- platform: template
name: ${device_name} Temperature Correction
id: temperature_correction
entity_category: config
unit_of_measurement: '°C'
min_value: -10
max_value: 10
step: 0.5
restore_value: true
optimistic: true
set_action:
then:
- globals.set:
id: temperature_correction_global
value: !lambda 'return x;'
##### page-timeout #####
- platform: template
name: ${device_name} Page Timeout
id: page_timeout
entity_category: config
min_value: 0
max_value: 60
initial_value: 10
step: 1
restore_value: true
optimistic: true
##### START - DISPLAY START CONFIGURATION #####
display:
- id: disp1
platform: nextion
uart_id: tf_uart
tft_url: ${nextion_update_url}
on_setup:
then:
- logger.log: "Nextion start - Jump to page 8"
- lambda: id(disp1).send_command_printf("page 8");
- logger.log: "Nextion start - Publish ESPHome version"
- lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.4.1"); ### esphome-version ###
- logger.log: "Nextion start - Wait for Home Assistant API"
- wait_until:
api.connected
- logger.log: "Nextion start - Publish IP address"
- lambda: id(disp1).set_component_text_printf("boot.ip_addr", "%s", id(ip_address).state.c_str());
- delay: 1s
- logger.log: "Nextion start - Set display brigntess"
- number.set:
id: display_brightness
value: !lambda 'return id(display_brightness_global);'
- logger.log: "Nextion start - Set display dim brightness"
- number.set:
id: display_dim_brightness
value: !lambda 'return id(display_dim_brightness_global);'
- logger.log: "Nextion start - Update settings page"
- lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
- lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
- lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
- lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
- if:
condition:
switch.is_off: sleep_mode
then: *sleep_mode-turn_off
else: *sleep_mode-turn_on
- delay: 1s
- logger.log: "Nextion start - Inform Home Assistant display is ready"
- binary_sensor.template.publish:
id: nextion_init
state: true
- logger.log: "Nextion start - Done!"
### Script for page_timer
script:
- id: page_timer
mode: restart
parameters:
delay: int
then:
- lambda: ESP_LOGD("nspanel", "start page-timer delay %i", int(id(page_timeout).state));
- delay: !lambda return delay *1000;
- lambda: |-
DynamicJsonDocument doc(1024);
deserializeJson(doc, id(disp1_nspanel_event).state);
std::string page = doc["page"];
if (page == "home" or page == "screensaver" or page == "boot" or int(id(page_timeout).state) == 0) {
ESP_LOGD("nspanel", "no page-jump");
} else {
ESP_LOGD("nspanel", "timer->home");
id(disp1).send_command_printf("page 0");`
}